Home > News > Content
Forging Process Produces The Advantages Of Truck Wheels
Jul 28, 2017

Forging process produces the advantages of truck wheels

0 (1).gif

1. own light Forged aluminum ring weight is only equivalent to half the weight of the ring to 22.5X8.5 for example, forging

The aluminum ring is 25 kg and the ring is at least 45 kg.


Save fuel. After the installation of forged aluminum ring, due to the reduction of the weight of the vehicle, the reduction of the rotational inertia of the wheel .So that the vehicle to improve performance and reduce the corresponding braking energy demand, thereby reducing the fuel consumption plus.Forged aluminum ring unique air flow and rolling resistance so 100 km test savings rate per hundred kilometers minimum section.Province 2 liter oil .Replacement of forged aluminum ring and the use of air conditioning after 100 km fuel consumption than forged aluminum ring is not open.The fuel consumption of the former is lower than the latter by 2.5 liters.


3. Tire wear reduced by 26%. Due to the characteristics of the forging ring, its equilibrium value is 0 and that is not easy to deform .normal driving temperature 20-30 degrees lower than the ring, the protection of the suspension system is better so the tire wear,Greatly reduced so that each tire run more than 5-8 million kilometers.


4. Brake maintenance costs are reduced. Due to the characteristics of forging aluminum ring temperature is very fast, the normal driving temperature is low, so right.Brake system is not high temperature materials and accessories have excellent protection effect, thus greatly reducing the braking system.Repair fees.


5. Load capacity is high for forging ring bearing energy is 5 times the ordinary iron ring. Forged wheels in the bear 71200 public

After the deformation of 5 cm. The iron ring has been deformed by only 5,600 kg after 5 cm. In other words, forged cars

The strength of the circle is 5 times more than the steel ring.


6. Improve the comfort of driving. Due to the characteristics of forged wheels, the installation of traffic after the direction of the lighter direction of the high-speed line

Especially the smoothness of the ride, thus improving the driving pleasure.


7. Good security For high-speed cars, because the tire landing friction, braking and other high-temperature explosion

Tires, brake performance and other phenomena are common. While the thermal conductivity of aluminum alloy is three times the steel, iron and so on

Plus the characteristics of aluminum alloy wheels because of its structure can easily tire, car chassis generated by the heat scattered in the air .Even in the case of long-distance high-speed driving or downhill continuous braking, the car can keep the proper temperature

degree. Not only can make the tire and brake drum is not easy because of high temperature and aging, can reduce the puncture rate.


8. Impact test. Japan JWL test simulation of a truck to over 50 km crashed into the roadside stone is equivalent to 910

The weight of the kilograms falls from the height to the wheels and wheels. According to the Japanese standard for the magnesium aluminum forging technology center

The result of the test was that the forged wheels were only slightly damaged and the damage to the rim was very serious. Cast aluminum alloy wheels are broken into two parts.

 9. handsome appearance. Forged aluminum ring design freedom can be combined with the model, such models may be combined with the vehicle, the wheel integrally with perfect.